Cordless Robotic Lawnmower - HECHT 5604

The Robotic Lawnmower cuts your lawn without work. It will go out into the garden at a regular set time and keep your lawn perfectly trimmed at all times. Simply set it up correctly according to the instructions, place the charging station and use the cable to define the area in which it is to work. The installation itself takes no more time than a single mowing of the lawn with a conventional mower, and that's the end of your work. The mower then goes out regularly at set times to take care of the lawn. As soon as the mower system detects that the battery power is dangerously low, the mower automatically returns to the charging station. After recharging, it continues working. Because the mower can mow virtually every day, the lawn does not suffer from the shock of impact mowing and thrives better. The tiny bits of straw that the mower cuts off then act as mulch, serving as fertiliser. At the same time, there is no waste from mowing.

The mower is protected against theft by a PIN code. Without knowing it, the mower cannot be started, making it unusable for thieves. Completely hidden under the mower is a rotating head with a trio of blades, which could be dangerous if the mower is lifted or tipped over. Therefore, the machine is equipped with sensors to ensure that the blades stop immediately when the mower is lifted. For other unforeseen situations, the mower is equipped with a large button on the top cover that can also be used to stop it instantly at any time. The cutting height can be adjusted from 25 to 45 mm.

The mower is equipped with carbon-free motors. For the HECHT 5604, the maximum recommended mowing area is up to 400 m2. The mower starts mowing at programmed intervals, which the user can set so that the mower does not disturb him in the garden.

The mower is supplied with a charging base, charging power supply, battery, 100 m of cable to define the mowing area and securing pins to anchor the base.

Demarcation cable supplied with the mower: 100 m, diameter 0.8118 mm, cross-section 0.5176 ^mm2

Warning:

The supplied demarcation cable has an optimised cross-section for the given length. The cable can therefore not be adjusted arbitrarily. To increase the mowing area, a new cable must be used so that it has the desired cross-section along the entire length, otherwise it cannot be guaranteed that the cable will reliably transmit the signal controlling the mower around the entire perimeter of the mowing area. The mower may then drive out of the defined area or not mow at all.